Identification of this unit
Set the number of relays mounted, the connector positions, the Circuit cuts and the complete labels on both sides. Keep the PCB identification removed and the complete Boiler model to see its cutting.
PCB Saunier Duval Isotwin F28-EA
PCB Saunier Duval Isotwin F28-EA re-conditioned. The photo unit has the SYMSI7.0 screen printing, three installed relays and a Fuse for Cartridge glass. Compare its configuration with the PCB removed from your Boiler before choosing the Replacement part.
Shipping €9Mainland Spain · free from €120
Returns14 days from receipt
WarrantyView terms
Secure paymentCard · PayPal · Google Pay · Bizum
VAT included
In stockEstimated delivery 24–48 business hours · mainland Spain
105 €
How to identify the correct Control board
The PCB coordinates functions of the equipment through its inputs, outputs and circuits of Control. To choose a Replacement part, it is interesting to identify the complete revision and how it connects to the Boiler, in addition to the commercial name.
In this unit there are three black relays mounted and a fourth position without relay. That distribution helps to distinguish it from other cards on the same platform. SYMSI7.0 is the screen printing of the Circuit: by itself it does not identify all revisions nor does it prove that any PCB with that marking is interchangeable.
Spare part data
- Circuit Screenprint
- SYMSI7.0
- Relays installed
- 3 black relays; a fourth position without relay
- Fuse visible
- Cartridge glass in Fuse holder
Comparison
Place your part beside it.
Choose a photo of your part to view it beside this unit. Compare the labels, connectors and mounting points from the same angle.
Your photo stays on your device: it is not sent or stored.
Model listed in the catalogue
This tab is catalogued for Saunier Duval Isotwin F28-EA. The photo unit is visually identified by SYMSI7.0 and three installed relays. Before replacing it, it contrasts the service reference and configuration with the cutting of the exact variant of your Boiler.
IsotwinSaunier Duval
- F28-EAListed application; check variant and configuration
No models are documented for that search.
The model shown comes from the identification of this sheet. It does not constitute a list of other compatible Boilerss nor does it prove equivalence with all SYMSI7.0 revisions.
Before replacing the part
Before replacing the Part
A Boiler that does not boot may have a power problem, sensors or other components. The diagnosis must precede the replacement of the Control board.
Service in Madrid and surrounding areas
Do you need us to install it?
We repair boilers in Madrid and the surrounding areas. Installation is arranged separately from the purchase of the part.
Questions about this spare part
Is it enough that two plates have the same connectors?
No. The applicable reference, revision and configuration provided by the manufacturer for the equipment must also coincide. The appearance and connectors help to rule out differences, but do not replace that identification.
What identifies the SYMSI7.0 marking of this PCB?
It is the visible screen printing on the impreso circuit. It serves to recognize the electronic platform, but does not replace the service reference nor confirms compatibility with all Boilerss that use cards of similar appearance.
How many relays does the unit have photographed?
Three black relays installed and a fourth position without relay are observed. Compare this configuration to the original unit; equivalence with four relay versions is not assumed.
Pressure gauges and aquastats
Pressure gauge AND Temperature Saunier Duval SD 214/23 C
7 €Out of stock
