Reference and Pressure
Compare the C6065F1241:2 code and the mark P = 1,65 mbar, in addition to the Ports and the fixation. It is not enough for another Pressure switch to be Honeywell.
air pressure switch Ferroli Domina F30E · Honeywell C6065F1241:2
Pressure switch Honeywell C6065F1241:2, catalogued for Ferroli Domina F30E. The label shows P = 1,65 mbar, Pressure maximum 6 mbar and C, NC and NO contact scheme. Compare the full markup with that of your Part.
Shipping €9Mainland Spain · free from €120
Returns14 days from receipt
WarrantyView terms
Secure paymentCard · PayPal · Google Pay · Bizum
VAT included
In stockEstimated delivery 24–48 business hours · mainland Spain
27 €
Monitoring of combustion air
The differential Pressure switch uses the difference of Pressure to switch an electrical contact. In this unit the pneumatic Ports and the scheme C, NC and NO impreso can be identified together with the electrical values.
The value P = 1,65 mbar corresponds to the marking of this Part; it should not be confused with the maximum Pressure of 6 mbar. A Boiler lock does not allow the fault to be attributed to the Pressure switch alone.
Spare part data
- Manufacturer of the componente
- Honeywell
- Full label code
- C6065F1241:2
- Type
- Pressure switch air differential
- Pressure P indicated
- 1,65 mbar (165 Pa)
- Maximum indicated Pressure
- 6 mbar
- Electrical contact marking
- 1,5(0,5) A · 250 V CA
- Contacts identified
- C (common), NC and NO
Transcribed data from the printed unit label. They are not measured values in an operating test.
Comparison
Place your part beside it.
Choose a photo of your part to view it beside this unit. Compare the labels, connectors and mounting points from the same angle.
Your photo stays on your device: it is not sent or stored.
Catalogued application and selection
The name Ferroli Domina F30E is preserved from the two catalogues. Contrast the reference and the marking with the Part installed and the cutting of that variant. For another Boiler, consult your service reference before choosing this unit.
No models are documented for that search.
Compare the Part label installed and the cutting of your variant before you buy.
Before replacing the part
Diagnosis of the air Circuit
The technician must check tubes, connections and evacuation according to the equipment manual. This Safety device element must not be cancelled or bridged to use the Boiler.
The installation and testing of the equipment are carried out by a qualified technician.
Service in Madrid and surrounding areas
Do you need us to install it?
We repair boilers in Madrid and the surrounding areas. Installation is arranged separately from the purchase of the part.
Questions about this spare part
What reference can be read in this unit?
The photographed label identifies C6065F1241:2. The equivalence with a Ferroli service reference must be checked in the corresponding cutting before choosing the Replacement part.
What is the difference between 1,65 and 6 mbar?
The label marks P = 1,65 mbar and a maximum Pressure of 6 mbar. These are different data and both must be respected when identifying the componente.
