The housing does not determine calibration
The colour of the label and the external resemblance are not enough to choose the Replacement part. Confirms the marking and version; it is not proposed to modify its setting.

air pressure switch Manaut Micon 24 E refurbished. Pressure switch black square with white semicircular label, green center and two raised Ports. Compare the indicated tarado, Ports Pressure and electrical contacts with the Pressure switch installed.
Compare the full code, Ports and terminals. Two Pressure switches can share housing and have a different calibration.
The form of the label and the Ports raised. Compare the views from the same angle and the complete identification of the Part removed.
Choose a photo of your part to view it beside this unit. Compare the labels, connectors and mounting points from the same angle.
Your photo stays on your device: it is not sent or stored.

Application listed in the catalogue: Manaut Micon 24 E. The variant and configuration must match the installed equipment; this does not establish compatibility with other models.
No models are documented for that search.
Application taken from the catalogue, pending comparison with the installed variant. This does not constitute compatibility certified against an exploded diagram.
The colour of the label and the external resemblance are not enough to choose the Replacement part. Confirms the marking and version; it is not proposed to modify its setting.
We repair boilers in Madrid and the surrounding areas. Installation is arranged separately from the purchase of the part.
Pressure switch black square with white semicircular label, green center and two raised Ports. Compare these details with the removed Part and its complete identification.
The form of the label and the Ports raised. Compare the views from the same angle and the complete identification of the Part removed.
This product page identifies the catalogued application Manaut Micon 24 E. It does not establish equivalence with other versions; service documentation linking Part to the specific model is required to extend compatibility.