The housing does not determine calibration
The colour of the label and the external resemblance are not enough to choose the Replacement part. Confirms the marking and version; it is not proposed to modify its setting.

air pressure switch Saunier Duval Themaclassic F24 E reconditioned. Pressure switch circular white with Cover marked center, upper terminals and Tube lower. Compare the required tarado, Ports Pressure and electrical contacts with the Pressure switch installed.
Compare the full code, Ports and terminals. Two Pressure switches can share housing and have a different calibration.
The Cover marked and the lower Tube. Compare the views from the same angle and the complete identification of the removed Part.
Choose a photo of your part to view it beside this unit. Compare the labels, connectors and mounting points from the same angle.
Your photo stays on your device: it is not sent or stored.

Application listed in the catalogue: Saunier Duval Themaclassic F24 E. The variant and configuration must match the installed equipment; this does not establish compatibility with other models.
No models are documented for that search.
Application taken from the catalogue, pending comparison with the installed variant. This does not constitute compatibility certified against an exploded diagram.
The colour of the label and the external resemblance are not enough to choose the Replacement part. Confirms the marking and version; it is not proposed to modify its setting.
We repair boilers in Madrid and the surrounding areas. Installation is arranged separately from the purchase of the part.
Pressure switch white circular with Cover marked center, upper terminals and Tube lower. Compare these details with the Part removed and their complete identification.
The Cover marked and the lower Tube. Compare the views from the same angle and the complete identification of the removed Part.
This product page identifies the catalogued application Saunier Duval Themaclassic F24 E. It does not establish equivalence with other versions; service documentation linking Part to the specific model is required to extend compatibility.